Documentshow-to-connect-pi-3-to-wireless-network
How to connect Pi 3 to wireless network
Set the Wi-Fi name and password from the player's settings page, using one of a few methods.
This was written for the Pi 3 and the 1.9.7 era images. The methods below still work on Pi images, and the settings page is the same one described in How to change player settings for network and server.
You can set the Wi-Fi access point name and password in any of these ways.
- Access point mode: On an SD card with image 1.9.7 or higher, the player acts as a Wi-Fi access point until its first configuration. Connect a laptop to the access point
piplayer_xxxx, where xxxx is the last 4 digits of the player ID. Then openhttp://192.168.100.1:8000/settingsto configure Wi-Fi and the other player settings. A blog article has more detail. - Keyboard: Connect a USB keyboard to the player and press Ctrl+N.
- Local network: If the player is on your local network, open
http://<player ip>:8000/settings. - USB tethering: Connect a smartphone to the Pi via USB and use USB tethering.
- Advanced options: Another blog article covers advanced Wi-Fi options and disabling the internal Wi-Fi.
For open and hidden networks see How to connect to open wifi or hidden wifi network.