Documentshow-to-change-player-settings-for-network-and-server

How to change player settings for network and server

Set a static IP, Wi-Fi or a different server on the player using any of five methods.

By default the Pi gets its network address from a DHCP server over Ethernet. You can instead set a static IP for Ethernet, or configure Wi-Fi. The player connects to the pisignage.com server by default, and you can point it to your own server. If you use the open source server, add port 3000 to the address, for example :3000 after the server name.

Pick the method that fits your setup.

1. USB keyboard

Connect a USB keyboard to the player and press Ctrl+N or F6.

2. Wi-Fi hotspot

Newer images turn on a Wi-Fi hotspot until the player is configured.

  1. On a phone or laptop, connect to the network named piplayer_xxxx, where xxxx is the last four characters of the player ID. The password is piplayer.
  2. Open http://192.168.100.1:8000/settings in a browser.

More detail is in this blog article.

3. Local network

If the player is on your local network, open http://{{ your player ip}}:8000/settings, replacing the placeholder with the IP address of the player.

4. SSH

You can SSH into the Pi player. See Issue shell commands or connect to pi terminal.

5. USB tethering

  1. Connect a smartphone to the player via USB and enable USB tethering on the phone.
  2. Open http://192.168.100.1:8000/settings in a browser on the connected device.
  1. Secure communication (https) between player and server 
  2. How to connect Pi 3 to wireless network 
  3. Raspberry Pi for the current setup