Documentssd-card-of-pisignage-image-not-working---no-display
SD card of PiSignage image not working - no display
The image only boots to an HDMI display. Connect a standard HDMI TV first.
The PiSignage image only supports HDMI connected TVs while booting. If nothing shows, check the display type and the cable.
What to do
- Connect to a standard HDMI TV.
- Edit
/boot/config.txtfor your display type, as described in Supporting different display types.
For more details on HDMI to VGA adapters:
- Troubleshooting a Raspberry Pi HDMI-VGA adapter
- Connecting a Raspberry Pi 3 to a VGA monitor using an HDMI-to-VGA converter
If the SD card is fine but the player still does not reach the welcome screen, see pi boots but does not show welcome screen.