Documentssupporting-different-display-types

Supporting different display types

Support for other display types comes from two parameters in config.txt.

This applies to older Raspberry Pi images that use /boot/config.txt. It is kept for reference. For TVs showing the wrong resolution on 5.x players see PiSignage screen displays at a lower resolution or incorrect resolution on TV.

Display types are supported by changing the hdmi_group and hdmi_mode parameters in /boot/config.txt. The Raspberry Pi documentation covers these parameters in detail.

Edit config.txt

  1. Connect to the Pi terminal as described in Issue shell commands or connect to pi terminal.
  2. Open the file with an editor such as nano or vi.
    nano /boot/config.txt
    
  3. Set hdmi_group and hdmi_mode for your display and reboot the player.

The original article wrote the path as /boot/config/txt in step 2. That looks like a typo for /boot/config.txt.