Documentssupport-for-pal-and-ntsc-analog-rca-video
Support for PAL and NTSC analog RCA Video
Connect a Raspberry Pi to an older PAL or NTSC TV with an RCA cable
This applies to Raspberry Pi players with a 3.5mm connector.
A PiSignage player can connect to PAL or NTSC TVs over an RCA cable.
- Buy a standard 3.5mm 3-pin to RCA cable. Connect one end to the TV and the other to the 3.5mm connector on the Pi.
- Disconnect the HDMI cable.
- In the group, open Settings and select the PAL or NTSC option as needed.
- Save and deploy.
TV OFF/ON and other CEC functions are not available in this mode.
Group Settings covers the rest of the group settings, and Groups covers deploying. Audio output on 3.5mm port explains the audio side.